|If you can't see this e-mail properly, view it online|
New BPW Shock Absorber Design
BPW Axles is introducing a new plastic protective tube design for its shock absorbers for series production as from week 29-2016.Please note:
The shock absorbers will be available under the same part numbers.
The existing design will remain alongside the new design.
The shock absorbers are technically identical, right down to the design of the protective tube.
This means that the shock absorbers are interchangeable and can be mixed in the same vehicle,
or on the same axle.
Due to the protective tube being plastic, extra care has to be taken in
the installation of the suspension into the chassis. It is important that
the protective tube of the shock absorber has to be protected
from welding splatter.
An example on how to protect the protective tube can be seen in the picture below.
(Heat resistant cloth)
Please ensure that your production processes take this change into
consideration when building your trailers.
Please contact BPW Axles if you have any queries.
Register for the BPW General / Technical / Information Bulletins to receive regular products updates and useful information on www.bpw.co.za or click here to view
all our Bulletins on our website.
|If you don't want to receive our news anymore, unsubscribe|